If you’re just joining, welcome to the Bitterroot Scrap Wood Series!
Head over to Day 1 to catch the beginning of the shenanigans, as well as our exciting news.
Long story short – I’m sharing a new scrap wood project every Monday, Wednesday, and Friday in May and this is Day 9!
This post contains affiliate links. If you make a purchase from one of the links, I may make a small commission at NO EXTRA COST to you. This helps keep the tutorials and plans free here at Bitterroot DIY. Thank you for your support! See my full disclosure here.
This entryway shelf was one of my favorite scrap wood projects that I completed during this series. It’s quick, easy, and useful – a practical way to organize your keys and also add some decoration.
Tools & Supplies:
- Wood Glue
- 1 1/4″ Screws
- Key Hooks
- 10″ of 1×6
- 3″ of 1 x 2
Cut your spare lumber to length.
Position the small 1 x 2 shelf 1″ from the end of the 1 x 6 board and 1/2″ from the bottom. Mark the position of the shelf piece and pre-drill two holes from the back of the 1 x 6 board. Once you’ve pre-drilled the holes, attach the 1 x 2 shelf with wood glue and 1 1/4″ screws. Place screws from the back of the 1 x 6 so you won’t see them in the front.
** Tip: pre-drilling ensures the wood will not split when you add the screws.
Pre-drill holes for the key hooks spaced at 1″ and then add the key hooks. You can find cup key hooks at any hardware store, Walmart, or on Amazon.
Sand and finish as desired. I used Minwax Special Walnut and sealed it with Spray-On Polyurethane to protect the wood.
To finish it off, I added a small bud vase from Hobby Lobby, a sprig of eucalyptus, and my keys!
Let me know if you have any questions and I’ll get back to you as soon as possible!
Thanks for stopping by!
For more project ideas, you can find me on Pinterest. And to stay up to date with the latest shenanigans, follow me on Instagram.